SEC.01 / COMPONENT TYPES
What we machine, by component
Every part on this site is one of these component types. Each page explains what the component is, the parts we run, and the industries it ships into.
TYPE.01
2 PARTSBroadheads
Screw-in hunting broadheads: fixed-blade and serrated, machined from steel and stainless.
ArcheryHuntingSporting goods
View parts →
TYPE.02
11 PARTSArrow Target Points
Glue-in and screw-in target points in brass and stainless, standard and bulged-waist profiles.
ArcherySporting goodsTarget ranges
View parts →
TYPE.03
1 PARTArrow Inserts & Nocks
Turned shaft inserts, outserts and bushings that seat points and nocks into the arrow.
ArcherySporting goods
View parts →
TYPE.04
6 PARTSContact Pins & Probes
Gold-plated contact and probe pins, connector pins and hinge pins for electronics.
ElectronicsTelecomTest & measurementMedical devices
View parts →
TYPE.05
2 PARTSStandoffs & Spacers
Machined standoffs, spacers and support studs that set and hold board or panel spacing.
ElectronicsTelecomEnclosuresIndustrial equipment
View parts →
TYPE.06
15 PARTSRotor Hubs & Heat Sinks
Balanced rotor hubs, support plates and radial heat-sink parts machined from aluminum.
UAV / droneThermal managementElectric motorsAerospace hardware
View parts →
TYPE.07
29 PARTSMotor Mounts & Brackets
Aluminum drone motor mounts, seats and brackets: multi-lug flanges cut for repeatable motor seating.
UAV / droneRoboticsAerospace hardwareCamera gimbals
View parts →
TYPE.08
6 PARTSRetaining Rings & Locking Nuts
Machined locking nuts, retaining rings and caps that hold rotating drone hardware in place.
UAV / droneElectric motorsFastening hardware
View parts →
TYPE.09
16 PARTSValve Spools & Stems
Multi-step valve spools, stems and cores that meter air and fluid inside pneumatic valves.
PneumaticsAutomotiveFluid powerIndustrial automation
View parts →
TYPE.10
10 PARTSPistons & Plungers
Turned piston cores and plungers, single and multi-step, for pneumatic and automotive actuators.
PneumaticsAutomotiveFluid powerActuators
View parts →
TYPE.11
26 PARTSFittings & Connectors
Threaded fittings, connectors, nipples and nozzles for air, fluid and gas lines.
PneumaticsAutomotiveGas & fluid linesPlumbing hardware
View parts →
TYPE.12
10 PARTSBushings & Sleeves
Flanged and stepped bushings and sleeves: bores, seal grooves and guide surfaces held concentric.
AutomotivePneumaticsElectronicsUAV / drone
View parts →
TYPE.13
5 PARTSThreaded Shafts & Screws
Turned threaded shafts, adjustment screws and drive rollers with milled and knurled features.
AutomotiveIndustrial machineryMotion & transmissionUAV / drone
View parts →
TYPE.14
3 PARTSFixture Blocks & Housings
Milled fixture blocks, clamp bodies and turned housings with bores, grooves and mounting features.
Industrial machineryTooling & fixturesAutomationCustom hardware
View parts →
TYPE.15
13 PARTSPins & Studs
Turned pins, studs, dowels and connecting shafts: located, grooved and cross-drilled to your print.
AutomotiveElectronicsAssembly hardwareUAV / drone
View parts →
TYPE.16
3 PARTS